Geepas Rotary Hammer

+1

Other

Chapa

Nyundo ya mzunguko

Aina

Umeme wa Waya

Chanzo cha Nguvu

Chapa Mpya

Hali

Anwani ya duka

Kampala • Idara ya Kati

Yamaha center LB 52 basement

Imefungwa sasa

• Jumatatu - Jumapili, 07:00-08:00

*Geepas rotary hammer* = power tool for drilling + chiseling concrete, brick, stone. It’s the “heavy-duty cousin” of a normal drill. Geepas has a few models, but most 800W-1500W ones work similar. Here’s the breakdown: *1. Common Specs - Geepas GHD1056 / GHD8002 etc* **Spec** **Typ-ical value** **What it means for you** **Power** 800W - 1500W 800W = light work. 1500W = break concrete **Impact energy** 2.5J - 5J 3J = drill holes. 5J = break/chisel walls **Speed** 0 - 900 rpm Variable speed trigger for control **Impact rate** 0 - 4000 bpm Blows per minute = drilling power **Max drilling** Concrete: 26mm - 40mm. Steel: 13mm. Wood: 40mm Concrete is the main job **Chuck type** SDS-Plus Takes SDS-Plus drill bits + chisels only **Modes** 3-in-1: Drill + Hammer drill + Chisel only Switch with mode knob

Onyesha anwani